White LED, single bright LED array with precision ground AR coated glass lens for clear focused beam up to 65'. Made from 2011 aircraft aluminum in a black anodized body color. Momentary (button) or constant (twist) On/Off tail cap switch. Waterproof to 150 feet. 10+ hours life,one AA battery. Measures 3.9 in. Green LED , single bright LED array with precision ground AR coated glass lens for clear focused beam. Made from 2011 aircraft aluminum in a gray/silver anodized body color. Twist constant on/off or momentary tail cap switch. Waterproof to 150 feet.10+ hours life,one AA battery. Made of AlGaIdP material, amber LEDs have a minimum output of 5,000 mCd, and the red LEDs have a minimum output of 8,000 mCd. The half angle of the LEDs is 30 degrees for wide viewing cone. The sensor array evaluates distance by detecting the intensity of the IR signal. So the distribution of light intensity from the Nav beacon needed to be fairly uniform for a wide range of operating angles.

Plug-in Unit for SignalMinder Automatic Turn Signal Cancellers. Sequential Turn Signal. Built-In Brake Light Flasher. Reduced Intensity Running Lights. Flexible: Fits Contour of Mirror. VL-10 VectraLight LED arrays are designed to be mounted on the bottom edge of the mirrors of most motorcycles. They are flexible so that they can bend somewhat to match contour of the mirror. The unit attaches to the mirrors with an extremely durable two-sided tape. Instead of replacing the entire mirror assembly, these arrays are easy to mount and provide additional functions: - Front facing 5 LED array in amber - Rear Facing 5 LED array in Red - Brake override for the rear facing LEDs Each LED array is totally waterproof and has a 6' (1.8m) long black USOC cable with an RJ-11 plug for inserting in the receptacles of the SignalMinder unit. VectraLights operate as a reduced intensity running lights, both amber LEDs in the front and red LEDs in the back operate SEQUENTIALLY as turn signals, and as brake lights the rear facing red LEDs come on at full brightness.